Alpine® AutoMill HP
The Alpine AutoMill HP sets the bar for outstanding performance in the component manufacturing industry. Full automation for 23 axes of motion increases setup speed and cutting accuracy, making the AutoMill HP top of its class among component saws. It features five blades to maximize the cutting range. Integrated air disc brakes stop the blades quickly and safely.
Standard Footprint: 47’-9” x 20’-3” (W x L)
*as shown
Fast &
Flexibility
The AutoMill HP’s flexibility allows you to cut the toughest jobs in the least amount of time.
Alpine Auto-Sequencing
The software knows the end of a run, and automatically sets up the angles and length for the next run.
Maximize Cutting Capability
Scarf, heel and seat cut in one pass
Features
-
Maximized Cutting Range & Throughput
Equipped with five carbide tipped blades that last longer than a standard steel tip blade. Integrated air disc brakes stop the blades quickly and safely. Three-cut scissor bottom chords can be cut simply. The saw will make the scarf, heel and/or seat cut in one pass.
-
Increased Speed & Setup Time
Full automation for 23 axes of motion increases setup speed and cutting accuracy. Accurate to ½ of a degree, and 1/16 of an inch at centerline
-
Versatile with Two Operational Modes
Automatic or semi-automatic operation can be used to best meet the demands and flexibility required by your production schedule.
-
Saw Production Reporter
The ability to create customizable data reports to measure your efficiency
-
Product Support
Our equipment is backed by a highly trained support team ready to assist you with any specific equipment needs. Please call (800) 755-6005 or email our experts at machinerysupport@alpineitw.com for onsite service or technical phone support.
Specifications
| Cutting Capability | ||
|---|---|---|
| Length | ||
| 2×3 in. to 2×12 in. | (Lumber upright on material conveyor dogs) | |
| 3×2 in. to 6×2 in. | (Lumber lying flat between material conveyor dogs) | |
| Manual Mode | 14 in. (90-90) to 20 ft. (2×4 in.) | |
| Auto Mode | 18 in. (90-90) to 20 ft. (2×4 in.) | |
| Cut Types: | • Chords • Scarfs • Heels • Seat Cuts | |
| Specification | Value | Value 2 |
|---|---|---|
| Saw Blade | Head 1 | 20 in. Carbide Tipped |
| Head 2 | 18 in. Carbide Tipped | |
| Head 3 | 18 in. Carbide Tipped | |
| Head 4 | 18 in. Carbide Tipped | |
| Head 5 | 32 in. Carbide Tipped | |
| Motor RPM | Head 1 | 3450 |
| Head 2 | 3450 | |
| Head 3 | 3450 | |
| Head 4 | 3450 | |
| Head 5 | 1725 | |
| Controller | PC | Industrial PC w/ Windows 10 Operating System |
| Monitor | 22 in. Flat Panel (Touch-Screen Optional) | |
| Communications | Ethernet | |
| Operating Temperature | 32°F to 104°F (0° to 40° C) | |
| Humidity | 10 – 95%, NON-CONDENSING | |
| Max Altitude | 6500 ft. | |
| Shipping Weight | 18,000 lbs. |
| Value |
|---|
| Left or Right Hand Refuse System |
| Touchscreen Monitor |
| Label Maker |
| Value |
|---|
| AutoMill, AutoMill RS, AutoMill SC, AutoMill HP |
| Specification | Value |
|---|---|
| Emergency Stop: | Pushbutton, safety cable around 3 sides |
| Safety Compliance: | ETL listed panels |
| Labeling: | Trilingual (English, Spanish, French) |
| Carriage movement: | Horn (85db) and flashing light |
| Guards: | Metal guards to protect from flying blocks |
